How to set up the gogoCLIENT with a Freenet6 account
Enable Routing Advertisements on the interface that goes to the Internet (in my case, the WiFi-USB)
I recommend that you complete Proj 13: Router Advertisements before this one, so you can be sure the Router Advertisements are being correctly sent.
Log in as root with password toor
Type this command and then press the Enter key:
startx
Open a Terminal window and enter these commands:
/etc/init.d/networking start
ping google.com
Make sure you are getting replies.
On the Windows 7 host computer, in the gogoCLIENT Utility, on the Status tab, find your Delegated Prefix. Mine is 2406:a000:f004:6d00/56, as shown below:
On the Windows 7 host computer, open a Command Prompt and execute this command:
ipconfig
You should see your interface's delegated IPv6 address, which should end in ::1.
Mine was 2406:a000:f004:6d00::1, as shown below.
The Router Advertisements are supposed to cause the Linux machine to automatically configure its IPv6 address and default gateway. But it fails most or all the time on BackTrack--I don't know why. The workaround I found is to manually configure the IPv6 address and default route.
In the BackTrack 4 R2 VM, in the Terminal Window, execute these commands to assign an IP address to the eth0 interface and a default route (replacing the address prefixes with your own delegated prefix):
ifconfig eth0 add 2406:a000:f004:6d00::5/64
ip -6 route add default via 2406:a000:f004:6d00::1
In the BackTrack 4 R2 VM, in the Terminal Window, execute this commands to
test your IPv6 networking:
ping6 ipv6.google.com
You should see replies, as shown below. Press Ctrl+C to stop the pings.
Save a screen shot of this image with the filename
Proj 14a from Your Name
http://samsclass.info/ipv6/scan-google.html
cd /pentest/spoofing/thc-ipv6
./alive6 eth0
You should see at least one host Alive, as shown below.
Save a screen shot of this image with the filename
Proj 14b from Your Name
Email the images to cnit.124@gmail.com with a subject line of
Proj 14 from Your Name
Last modified 4-21-2011 10 am